-The HN12-C101 Set is a set consisting of a clamping horn, two bolts and a thrust washer designed for the DYNAMIXEL XH430 and XM430 models.
– The horn is to be connected to the wheel gear of the output shaft of the DYNAMIXEL.
– The bolt clamping structure allows the horn to be more engaged to the wheel gear, and provides the effect of preloading the clamping force of the output shaft.
– When the output shaft wears out due to vibration and shock, the clamping bolt increases the clamping force for continuous use.
– When using LOCTITE on the screw, it can be tightened more firmly.
– This set is not compatible with the hinge frame, FR12-H101K Set. The hinge frame compatible with this clamping horn will be released soon.
|Wrench Bolt WB M2.5×8||1||Bolt for fastening horn to wheel gear|
|Wrench Bolt WB M2x8||1||Bolt for clamping|
|Thrust Washer||1||Thrust Washer|
All models in the XH430 and XM430 series
Please be sure to check the assembly instruction below before use.
– Please note that the HN12-C101 Set is NOT compatible with the entire DYNAMIXEL MX-series and the XL430, XC430, 2XL430 and 2XC430 in the X-series.
– For XW, rust may occur depending on the operating environment, so it is recommended to use stainless-type screws.